Xpanda Security

The RDF security fitting is designed to prevent unauthorised opening of roller doors. The RDF security housing is attached to the roller door, either internally or externally. The high tensile eyebolt is inserted into a predrilled hole in the floor .The RDF housing then settles over the eyebolt when the roller door is shut, and secured by a padlock through the eyebolt.

Xpanda Saftibarrier is a powder coated steel retractable grille system. The Saftibarrier is modular and suitable for all opening widths and heights up to 2500mm . The Saftibarrier system is ideal for the protection of roller doors where more than just pedestrian access control is required. The design of the grille system permits it to retract to within 15% of its opening size and a hinging system allows the grille to be swung away from the opening.

Rollerguard pedestrian barrier, is offered in an aluminium construction with a powder coated finish, and brings to market a range which stands up to robust handling ,  can cater to most budgets. The addition of castors gives a high degree of mobility. The modular nature provides a flexible product which can be modified to the requirements of each individual client.

Sentry removable bollards are ether galvanized or stainless steel. Removable Bollards are required where unobstructed access will be required intermittently. The bollards are mounted into an in ground sleeve and secured with a padlock. The system has a pedestrian cover plate, to prevent possible injury when the bollards are not in position.

Sentry ram beams are primarily used a traffic barriers, and installed across the face of roller doors as additional ram raid security or across access road or driveways. The ram beams are manufactured from steel and are either hinged to pivot way from the opening or can be fully removable. All ram beams are hot dipped galvanized and secured with anti tamper padlocks.